Allston

Lorem ipsum dolor sit amet, vix ea veritus delectus. Ignota explicari.

a

Contact

231 East 22nd Street, Suite 23 New York NY 10010

Email: office.ny@ratio.com
Fax: +88 (0) 202 0000 001

Backup Page

[rev_slider alias=”home-5″]

Rooftop Waterproofing

Roofing being one of the most common maintenance issues, the EPDM provides a direct solution to this age old problem. The EPDM membrane is so adaptable that it conforms to any shape or style of a roof while preventing any leakage or water damage to the structure.


The EPDM membrane (ethylene propylene diene terpolymer) is a durable, synthetic rubber membrane used for waterproofing, roofing, underlayment, and lining applications. It provides sustainable solutions for various systems due to its unique properties such as high resistance to ultraviolet, ozone, and other chemicals. The EPDM membrane can be installed either fully adhered, attached or ballasted mechanically with the help of liquid adhesives or specially formulated tape.
Features & Benefits
  • Large commercial roofs of concrete, wood, asbestos & metal sheets
  • Terrace Gardens
  • Basements, Foundations and Podium slab coverings
  • Lakes / ponds / reservoirs / canal and tunnel linings
  • Swimming pools / fish pond liners
  • Rooftops of storage silos
SURFACE PREPARATION
  • Surface needs to be smooth, dry and free of sharp edges and free from Oil & Grease.
  • Before laying the sheets, mark out the lines with chalk so that the membranes can be arranged properly and parallels with reference to the edges of roof area.
APPLICATION
  • Before applying KRUBBER™ adhesive, stir the container properly to achieve a uniform mix.
  • Apply KRUBBER™ Adhesive to KRUBBER™ Membrane Sheet on to the clean and prepared substrate and preferably also on to the back of the membrane.
  • Apply a thin even coat on the membrane and surface. Excess coat will increase drying time. Average drying time is about 10-15 minutes.
  • Unfold back the first half of the Membrane Sheet membrane carefully to ensure that there are no wrinkles during the sticking process. The sticking process can be done with a roller.
  • Repeat the bonding procedure for other half of Membrane Sheet.
  • Keep repeating this procedure for every roll to complete the laying of Membrane Sheet for the entire area.
  • An overlap of 50–70 mm along the length is a must. A masking tape must be first stuck to the laid membrane.
  • Thoroughly roll on the overlapped area with a 50 mm wide metallic roller.
STORAGE & SHELF LIFE

Store in a cool, dry place, out of direct sunlight and away from all sources of ignition. Storage areas must be well ventilated, store between 5° and 300c. Shelf life is up to 12 months when stored in original, unopened containers, under the above mentioned conditions.

The EPDM membrane (ethylene propylene diene terpolymer) is a durable, synthetic rubber membrane used for waterproofing, roofing, underlayment, and lining applications. It provides sustainable solutions for various systems due to its unique properties such as high resistance to ultraviolet, ozone, and other chemicals. The EPDM membrane can be installed either fully adhered, attached or ballasted mechanically with the help of liquid adhesives or specially formulated tape.

Features & Benefits
  • Large commercial roofs of concrete, wood, asbestos & metal sheets
  • Terrace Gardens
  • Basements, Foundations and Podium slab coverings
  • Lakes / ponds / reservoirs / canal and tunnel linings
  • Swimming pools / fish pond liners
  • Rooftops of storage silos
SURFACE PREPARATION
  • Surface needs to be smooth, dry and free of sharp edges and free from Oil & Grease.
  • Before laying the sheets, mark out the lines with chalk so that the membranes can be arranged properly and parallels with reference to the edges of roof area.
APPLICATION
  • Before applying KRUBBER™ adhesive, stir the container properly to achieve a uniform mix.
  • Apply KRUBBER™ Adhesive to KRUBBER™ Membrane Sheet on to the clean and prepared substrate and preferably also on to the back of the membrane.
  • Apply a thin even coat on the membrane and surface. Excess coat will increase drying time. Average drying time is about 10-15 minutes.
  • Unfold back the first half of the Membrane Sheet membrane carefully to ensure that there are no wrinkles during the sticking process. The sticking process can be done with a roller.
  • Repeat the bonding procedure for other half of Membrane Sheet.
  • Keep repeating this procedure for every roll to complete the laying of Membrane Sheet for the entire area.
  • An overlap of 50–70 mm along the length is a must. A masking tape must be first stuck to the laid membrane.
  • Thoroughly roll on the overlapped area with a 50 mm wide metallic roller.
STORAGE & SHELF LIFE

Store in a cool, dry place, out of direct sunlight and away from all sources of ignition. Storage areas must be well ventilated, store between 5° and 300c. Shelf life is up to 12 months when stored in original, unopened containers, under the above mentioned conditions.


The KRUBBER Adhesive is a single component, synthetic rubber based adhesive that consists of special additives and tackyfier. This product is specially formulated for porous and non-porous surfaces in a number of climatic conditions. Its quick and easy application allows for quick bonding of the EPDM membrane to various substrates. Hence, making it suitable to use in new constructions and renovations.
A medium nap roller should be bought to use with this adhesive. With the roller’s versatility in the tack time of the film, large areas can be coated and adhered at one time.
Features & Benefits
  • Suitable onto absorbent and impervious substrates as well as existing floor coverings.
  • High tack – No primer needed.
  • Easy and quick application.
  • Highly water resistance.
  • Economical coverage.
  • Suitable in new constructions and renovation.

As with all chemicals, caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air and if needed immediately start artificial respiration. Give oxygen if breathing is laboured. Get emergency medical help

CLEANING & DISPOSAL

Excess adhesive may be removed immediately after the application. The Tools & the excess material should be cleaned immediately before it gets dry with warm water, preferably whilst the adhesive is still wet. Dispose the waste according to the local regulations or law of the land.

STORAGE & SHELF LIFE

Store in a cool, dry place, out of direct sunlight and away from all sources of ignition. Storage areas must be well ventilated, store between 5° and 300c. Shelf life is up to 12 months when stored in original, unopened containers, under the above mentioned conditions.

PACKING

5 & 25 Kg

The KRUBBER adhesive is a single component, synthetic rubber based adhesive that consists of special additives and tackifiers. This product is specially formulated for porous and non-porous surfaces in a number of climatic conditions. Its quick and easy application allows for quick bonding of the EPDM membrane to various substrates. Hence, making it suitable to use in new constructions and renovations.
A medium nap roller should be bought to use with this adhesive. With the roller’s versatility in the tack time of the film, large areas can be coated and adhered at one time.

Features & Benefits
  • Suitable onto absorbent and impervious substrates as well as existing floor coverings.
  • High tack – No primer needed.
  • Easy and quick application.
  • Highly water resistance.
  • Economical coverage.
  • Suitable in new constructions and renovation.

As with all chemicals, caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Inhalation of vapour or mist should be avoided. If inhaled symptoms include coughing, wheezing, laryngitis, and shortness of breath, headache, nausea, and vomiting. Immediately shift victim to fresh air and if needed immediately start artificial respiration. Give oxygen if breathing is laboured. Get emergency medical help

CLEANING & DISPOSAL

Excess adhesive may be removed immediately after the application. The Tools & the excess material should be cleaned immediately before it gets dry with warm water, preferably whilst the adhesive is still wet. Dispose the waste according to the local regulations or law of the land.

STORAGE & SHELF LIFE

Store in a cool, dry place, out of direct sunlight and away from all sources of ignition. Storage areas must be well ventilated, store between 5° and 300c. Shelf life is up to 12 months when stored in original, unopened containers, under the above mentioned conditions.

PACKING

5 & 25 Kg


A high quality self adhesive sealing tape made of a butyl rubber compound, self-protected by a double sided release paper. The adhesive tape is flexible and forms a permanent bond to a range of substrates like concrete, rubber, metals, glass, polycarbonate, wood, asbestos, fibreglass, and textiles. With excellent cohesion at the time of installation, this sealing tape reinforces the bonding of a joint.
Advantages
  • Designed not to shrink, harden or oxidise.
  • Excellent resistance to extreme temperatures, acid, and alkaline environments.
  • Excellent heat stability.
  • Resistant to ageing and UV-rays.
  • Solvents free.

Available in various sizes and colours.

Surface Preparation

KRUBBER SEALING TAPE is compatible with most building materials, metals and flexible or hard plastics. The Surface should be clean, dry, smooth and dust-free. No Special tools are required to install this tape.

Installation

Excess adhesive may be removed immediately after the application. The Tools & the excess material should be cleaned immediately before it gets dry with warm water, preferably whilst the adhesive is still wet. Dispose the waste according to the local regulations or law of the land.

Dimensions and Packaging

Standard Length : 5 Mtr /10 Mtr
Standard Thickness : 1.3 mm To 5 mm
Standard Widths : 10 mm- 300 mm
Other widths, length and thickness are available on request. The Rolls are packed in Corrugated Boxes.

Caution and Safety

The material is not hazardous for normal uses. Keep out of reach of children. Possible handling risks; cuts and Abrasions in particular conditions.

Important Note

The manufacturer disclaims all liability for product use and applications. No generic guarantees can be provided, even if the instructions indicated on this sheet are followed.

STORAGE & SHELF LIFE

The quality and the characteristics of materials remain unaltered for a long period of time. The Product is however best used within 12 months. The Product must be correctly stored in cool and dry premises, at or below 25°C room temperature. It is not affected by Frost.

  • Choose the most suitable size of the KRUBBER Sealing Tape
  • Unroll the Tape until the desired length is reached.
  • Remove the silicone release film that covers the adhesive part of the tape and position the tape.
  • Press with a roller or a cloth pad.

A high quality self adhesive sealing tape made of a butyl rubber compound, self-protected by a double sided release paper. The adhesive tape is flexible and forms a permanent bond to a range of substrates like concrete, rubber, metals, glass, polycarbonate, wood, asbestos, fibreglass, and textiles. With excellent cohesion at the time of installation, this sealing tape reinforces the bonding of a joint.
Advantages
  • Designed not to shrink, harden or oxidise.
  • Excellent resistance to extreme temperatures, acid, and alkaline environments.
  • Excellent heat stability.
  • Resistant to ageing and UV-rays.
  • Solvents free.
Surface Preparation

KRUBBER SEALING TAPE is compatible with most building materials, metals and flexible or hard plastics. The Surface should be clean, dry, smooth and dust-free. No Special tools are required to install this tape.

Installation

Excess adhesive may be removed immediately after the application. The Tools & the excess material should be cleaned immediately before it gets dry with warm water, preferably whilst the adhesive is still wet. Dispose the waste according to the local regulations or law of the land.

Dimensions and Packaging

Standard Length : 5 Mtr /10 Mtr
Standard Thickness : 1.3 mm To 5 mm
Standard Widths : 10 mm- 300 mm
Other widths, length and thickness are available on request. The Rolls are packed in Corrugated Boxes.

Caution and Safety

The material is not hazardous for normal uses. Keep out of reach of children. Possible handling risks; cuts and Abrasions in particular conditions.

Important Note

The manufacturer disclaims all liability for product use and applications. No generic guarantees can be provided, even if the instructions indicated on this sheet are followed.

STORAGE & SHELF LIFE

The quality and the characteristics of materials remain unaltered for a long period of time. The Product is however best used within 12 months. The Product must be correctly stored in cool and dry premises, at or below 25°C room temperature. It is not affected by Frost.

  • Choose the most suitable size of the KRUBBER Sealing Tape
  • Unroll the Tape until the desired length is reached.
  • Remove the silicone release film that covers the adhesive part of the tape and position the tape.
  • Press with a roller or a cloth pad.

The KRUBBER aluminium strip is non-corrosive, resistant to alkalis and provides a perfect finish. This product is utilized to create a frame-like structure to anchor the EPDM membrane. 

The KRUBBER EPDM sealant is designed to provide an effective secondary seal for critical flashing and seam junctures. The sealant extrudes along the membrane seam and the flashing edges as required, pertaining to KRUBBER specifications and details. 

Available in black and white colours.

The KRUBBER geotextile membrane is manufactured using non-woven fabric from polyester or PP fibres. Placed on the KRUBBER EPDM membrane, this protects it from sharp objects, while also enabling easy cement screed cladding and pebble ballasting. The geotextile membrane material maintains a uniform settlement of the subgrade. Hence, the sub strength is improved along with the overall sustainability of the system. We manufacture the KRUBBER geotextile membrane from 15 gsm to 1500 gsm.

There’s no reason for college or university students to be https://www.nulled.to/user/4493804-gregermc?tab=status embarrassed of using an affordable, cheap essay writing service to provide them with their academic writing. The writing skill is always improving under extreme competitive pressure. Most firms now offer http://pozhcomlect.ru/%D0%B1%D0%B5%D0%B7-%D1%80%D1%83%D0%B1%D1%80%D0%B8%D0%BA%D0%B8/science-american-discussion-on-global-warming-2/ a 100% confidentiality https://jorgeserrano.co/how-to-write-my-paper-4-me-tips-for-getting-into-a-trial-of-your-writing-abilities/ and anonymity guarantee. They take full responsibility to erase your essay from their servers once the contract is complete. Many firms now have a “no claims discount” and students can enjoy this special discount as well.

Prices charged by these affordable essay writing services vary depending on the firm that you choose. Some offer unlimited revisions for a flat one-off fee, while other firms charge a one-time flat rate for as many revisions as you require. Some also allow students to make as many changes to the content as they wish, whereas some only allow one change. This means that the content can never be changed once written. Other companies may offer the option to re-use the content, but this too will require an additional fee.

Writing services for cheap allow writers to write at their own speed. Many people use their word processing software. Some don’t. Your budget and your time are your choices. Students can https://www.westislandblog.com/la-maison-coup-de-coeur/ be confident that their work will be thoroughly inspected https://www.micla.ca/blog/8187/type-of-a-notice-of-commitment/ before it is handed over to the writer. Students that use a cheap essay writing service may expect great results and increased assurance that the writer will follow their suggestions.

Post a Comment

Dampx page download

Fill in your details to download the PDF